17ZEHN
17ZEHN
  • Diamant 28" / 50 cm
    28" / 55 cm
    28" / 60 cm
Colour:
schwarz matt
Find a dealer Compare

Expedition E-Bikes & Pedelecs of the e-bike manufaktur: 

For people with big goals.


The 17ZEHN proves its worth as a sporty travel and trip companion and is the high-end e-bike in our Expedition series. This e-bike is only available with a diamond frame. 

With the "48V Revolution", the 17ZEHN  has the unique 2-in-1 motor from Continental - motor and planetary gear combined in a compact housing. Choose between the automatic circuit -  continuously adjustable including under load - or manual gearshift using an Ergon button. The system is controlled via a Continental XT display - including numerous bike computer functions and Bluetooth interface. The power of the 48 V eBike system reliably brings a low-maintenance belt drive onto the road. The necessary power is supplied by a fully integrated battery with a capacity of 600 Wh.  

In combination with the fully integrated frame design specially developed for the Continental motor, the 17ZEHN becomes an e-bike for frequent riders with special demands on dynamics, function and design.  

More about Continental's e-bike motor can be found here.

 

Also with Connect!

For an increased protection against theft, you can buy this e-bike at an additional charge of 149,- euros and get it with Connect – the clever GPS-based anti-theft device which allows you to know exactly where your e-bike is at all times.

If you want to use Connect, this should be taken into consideration at the time of purchase. For security reasons, the Connect module is permanently mounted to the e-bike, so it cannot be installed at a later time.  

Everything you need to know about Connect can be found here

Frame size Diamant 28": 50, 55, 60 cm
Drive Unit Continental Revolution, 48 V mid motor, 250 Watt
Display Continental Display incl. Bluetooth
Akku Continental Framebattery integrated, 600 Wh, 48 Volt, 12.5 Ah, down tube
max load 170 kg
Frame Aluminium 6061, Continental-Interface
Headset Acros AZX-212 tapered
Fork Suntour springfork, Mobie45 LOR DS 80 mm
Rear derailleur ---
Front derailleur N.V.
Bremse Shimano Deore (180/160 mm) disc brake
Headlight Busch&Müller Lumotec IQ-X E, 150 LUX
Rear light Busch&Müller Toplight 2C
luggage carrier Aluminium Cargo
Saddle Ergon SFC30
Seat pillar Cane Creek Thudbuster ST with Medium-Elastomer (#5)
Pedal VP-617
Stand Pletscher Comp Flex, rear kickstand
Chain guard Horn Catena 14e
Fender SKS, plastic, Aluminium
Wight 27,4 kg
Handlebar stem Humpert Ergotec, High Piranha, 31,8 mm, safety level 6
Handlebar Humpert Ergotec Ladytown, safety level 6
Handle Herrmans DD37 with clampclamp
gearshift lever Continental Revolution
Break lever Shimano Deore, 3-Finger brake lever
Tyres Continental Contact Travel 50-622
Product data sheet
Gates Belt Drive – e-bike manufaktur

GATES BELT DRIVES

We have fitted some of our e-bikes with Gates' tried-and-trusted belt drive. As a result, complex lubrication and cleaning of chain and gears is now a thing of the past. This carbon-reinforced alternative to the chain is robust and requires little maintenance. In addition, the lightweight system has an impressively long service life. The lock washers also benefit from this solution: they are placed under less strain than with a chain drive.

Display – e-bike manufaktur

Display - everything in view

Lightweight and compact displays combine perfect legibility with ergonomic and intuitive operation. In addition to the display for the support level or charge status of the battery, the display offers numerous functions of a bicycle computer as well as a USB and Bluetooth interface. The clever automatic lighting mode is controlled by an integrated light sensor.

Dopouts – e-bike manufaktur

DROPOUTS WITH SOPHISTICATED FUNCTION AND HARMONIOUS APPEARANCE

The innovative dropout of our e-bikes offers an integrated mounting for a rear stand. In this way, the support can be installed quickly and easily. In addition, the multi-function drop-out end is equipped with an opening for the gate belt. This means it can be changed in no time at all. Thanks to its tidy appearance, the drop-out is a perfect match for the frame design.

Follow us on

e-bike manufaktura brand of cycle union GmbH

 

An der Schmiede 4

26135 Oldenburg

 

+49 (441) 9 20 89 135

info@e-bike-manufaktur.com

www.ebike-manufaktur.com

 

Managing Director:

Severine Lönne | Eberhard Dörr

Registration court: Amtsgericht Oldenburg

Register number: HRB 2295

St.-Nr. 64/200/21174

UStID: DE117475015

Mit * gekennzeichnete Felder müssen ausgefüllt werden